Dream Protect Cement Paint
Dream Protect Cement Paint
High Strength
No Added Lime
Breathable Paint
Superior Brushability
Reflect Heat
Economical Protection
COVERAGE
Concrete Surfaces – 32-50 in Sq. Fit/Kg. coat approx.
Suitable Bricks works – 35-60 in Sq. Fit/Kg. coat approx.
Wall – 50-90 in Sq. Fit/Kg. coat approx
TECHNICAL DETAILS
a) Curing : 1st & 2nd coat should be cured properly.
b) Drying time : 6 – 8 hr. depending on climate condition.
PRECAUTIONS
a) Do not apply when ambient temperature is less than 10°C or if the
temperature might drop to this level within 4 hours of application.
b) Do not over-thin or over-extend the brush.
c) Tint using Paints machine colorants.
d) Stir well and strain before use.
DIRECTION FOR USE :
1st Step : Ensure the surface is completely free from all dirt, loosely held plaster, oil grease or any other contamination. Pre wet the surface with clean water and wait for 30Minits.
2nd Step : Apply DREAM Prime Primer of 1:1 mixed with water and wait for recoating 6 to 8 depending on climatic condition.
3rd Step : Apply DREAM PROTECT Cement Paints through fine spray or brush and wait for 6 to 8 depending on climatic condition.
4rd Step : Wetting with water through spray of water wait for 30 minutes.
5th Step : Apply DREAM PROTECT Cement Paints through fine spray or brush and wait for 6 to 8 depending on climatic condition.
6rd Step : Wetting with water through spray of water wait for 30 minutes curing required for completely setting of Paint.
SAFETY FEATURES
a) Store the container with the lid tightly closed in an upright position, in a cool, dry place.
b) Keep out of reach of children and away from eatables.
c) May be harmful if swallowed. In case of ingestion seek immediate
medical attention.
d) Do not pour leftover paint down the drain or in water courses.
e) In the event of spills, contain spillage using sand or earth.
f) No added Lead, Mercury or Chromium compounds
PRE PAINTING CARE
Pre-Wet surface to be painted with clean water and allow the water to run off. Loosen the contents of DREAM PROTECT Cement Paints each sack of by rolling the sack before opening for the first time. Apply properly mixed Dream Protect with good quality brush. Do not use saline water for curing surfaces painted with DREAM PROTECT Cement Paints.